Hraju si tu s APRX a snazim se prijit na vsechny zaludnosti a fíčury v konfiguraci. Porad ale nemuzu prijit na to, jak korektne nastavit opakovani CZ apod. Nema nekdo jiz hotovy konfigurak?
Mohli bychom nejake vzorove schromazdit zde na jednom miste 🙂

Prikladam svoji TESTOVACI konfiguraci:
mycall OK1ALX-15

<aprsis>
#server czech.aprs2.net 14580
server 89.235.48.27 14580
filter "p/OK"
</aprsis>

<logging>
pidfile /var/run/aprx.pid
rflog /var/log/aprx/aprx-rf.log
aprxlog /var/log/aprx/aprx.log
</logging>

<interface>
serial-device /dev/usb/tts/0 9600 8n1 SMACK
initstring "rx1B@Kr"
callsign OK1ALX-15
tx-ok true
#callsign $mycall # callsign defaults to $mycall
#tx-ok false # TNC2 monitor can not have transmitter
</interface>

<beacon>
cycle-size 60m
beaconmode radio
beacon via "WIDE1-1,WIDE2-1" symbol "X#" lat "5004.54N" lon "01425.35E" comment "APRX test"
beacon dstcall "ID" via "WIDE1-1,CZ3-3" raw ">APRS digi&igate test APRX@WL-500gP"
beacon via "CZ3-3" symbol "X#" lat "5004.54N" lon "01425.35E" comment "APRX test"
beacon dstcall "ID" raw ">APRS digi&igate test APRX@WL-500gP"
beacon symbol "X#" lat "5004.54N" lon "01425.35E" comment "APRX test"
beacon dstcall "ID" raw ">APRS digi&igate test APRX@WL-500gP"
</beacon>

<digipeater>
transmitter $mycall
<trace>
maxreq 3
maxdone 3
keys WIDE,CZ
</trace>
<wide>
maxreq 3
maxdone 3
keys WIDE,CZ
</wide>
<source>
source $mycall
#relay-type directonly
#viscous-delay 5
</source>
<source>
source APRSIS
relay-type third-party
#via-path GATED
#viscous-delay 3
#filter b/OK1COM-10
</source>
</digipeater>

<telemetry>
transmitter $mycall
via WIDE1-1
source $mycall
</telemetry>

Zatim se mi podarilo jen to ze to opakuje max do CZ3-3 ale se substituci, tzn ze vzdy vlozi do cesty svoji call i u CZ....