Hi,
First, Im sorry for english, but i dont know czech, and You would have lot of fun i'd be writing in polish
I want to share with You my project - TNC modem and APRS digi based on DSP processor:
http://sp9uob.verox.pl/dstnc.html
http://sp9uob.verox.pl/dsdigi.html
73! de SP9UOB
dsTNC / dsDigi
- OK1ALX
- Posts: 558
- Joined: Mon 09. Mar 2009 15:50:19
- Jméno: Libor
- Location: Hostovlice, JN79RU
- Contact:
Re: dsTNC / dsDigi
Hello, Interesting project.
What are the current digi-configuration capabilities? Such as settings for WIDE digi, or Fill-in digi, SSn-N, Dupe check time etc.
How does the digipeater handle the digipeating?
For example this packet:
OK1AAA to APRS via WIDE1-1 WIDE2-2
does it handle this way?
OK1AAA to APRS via OK0BBB-2 WIDE1* WIDE2-2
or this way?
OK1AAA to APRS via OK0BBB-2* WIDE2-2
Thank you for answer.
Libor, OK1ALX
What are the current digi-configuration capabilities? Such as settings for WIDE digi, or Fill-in digi, SSn-N, Dupe check time etc.
How does the digipeater handle the digipeating?
For example this packet:
OK1AAA to APRS via WIDE1-1 WIDE2-2
does it handle this way?
OK1AAA to APRS via OK0BBB-2 WIDE1* WIDE2-2
or this way?
OK1AAA to APRS via OK0BBB-2* WIDE2-2
Thank you for answer.
Libor, OK1ALX
Libor, OK1ALX
Re: dsTNC / dsDigi
Thanx.OK1ALX wrote:Hello, Interesting project.
What are the current digi-configuration capabilities? Such as settings for WIDE digi, or Fill-in digi, SSn-N, Dupe check time etc.
Because lack of RAM memory (2 kb only, about 1 kb used in dsp algorithm) dsDIGI supports only WIDE1-1, no dupe checking is performed.
In dsDIGIv2 (much larger processor) will be full digi support with viscious delay and (maybe ethernet - Igate).
There is a filter function (circle, sector) - undocumented yet, still in testing.
This way, but it can be configured by request. You may look to raw packets relayed by SR9NOH, SP3VSS-3 (early beta version), or SP9UOB-15OK1ALX wrote: How does the digipeater handle the digipeating?
For example this packet:
OK1AAA to APRS via WIDE1-1 WIDE2-2
does it handle this way?
OK1AAA to APRS via OK0BBB-2 WIDE1* WIDE2-2
73! de SP9UOB,OK1ALX wrote: or this way?
OK1AAA to APRS via OK0BBB-2* WIDE2-2
Thank you for answer.
Libor, OK1ALX
Re: dsTNC / dsDigi
Hi,
New firmware is available:
- any alias WIDEn-N
- dupe checking
- telemetry (temperature, voltage, rx/tx count per 10 mins)
73!
New firmware is available:
- any alias WIDEn-N
- dupe checking
- telemetry (temperature, voltage, rx/tx count per 10 mins)
73!
Who is online
Users browsing this forum: No registered users and 11 guests